little fix

README.md

@@ -1,8 +1,10 @@
 # balccon_txt
 
+Welcome to the Hardware quest! There are three levels of difficulty in it, but foe all of the tasks the main idea is to fine a password that unlocks the board. To do it, you need to dump the firmware from the board and than reverse engineer it.
+
 ## Dump firmware
 
-You can use `OpenOCD` to dump firmware from STM32F103 mcu:
+You can use `OpenOCD` to dump the firmware from STM32F103 mcu:
 
 ```bash
 openocd -f interface/stlink.cfg -f target/stm32f1x.cfg -c init -c "reset halt" -c "flash read_bank 0 firmware_gold.bin 0 0x10000" -c "reset" -c shutdown
@@ -10,7 +12,7 @@ openocd -f interface/stlink.cfg -f target/stm32f1x.cfg -c init -c "reset halt" -
 
 ## Ghidra
 
-1. You need to load bynary file to ghidra systems:
+1. The following command may be used to dump the firmware from the board with the Ghidra software:
 
 - Press `I` and add `firmware_gold.bin`
 - Choose `ARM-Cortex-32-little`
@@ -18,4 +20,5 @@ openocd -f interface/stlink.cfg -f target/stm32f1x.cfg -c init -c "reset halt" -
 
 ![](2024-09-20_15-52.png)
 
-- Analyze -> YES, select ALL options, press Apply and finaly press Analyze.
+- Analyze -> YES, select ALL options, press Apply and finaly press Analyze.
+